Value Pack| Other Products |SpecFilm Concentrate
【COL-30921d14fd0570675ca255721e9d44e15aa831be】| Category | Other Products / General Merchandise / Other Products |
|---|
| 39.18 USD |
Recommended Other Products products
Customers who viewed this item also viewed
SpecFilm Concentrate is a concentrated evaporation retardant and finishing aid that prevents rapid moisture loss on concrete flatwork
SpecFilm Concentrate dilutes with potable water up to a 9:1 ratio, forming a thin, continuous film that's especially effective when concreting in direct sun, wind, high heat, or low humidity.
Key Features & Benefits
Significantly reduces plastic shrinkage and cracking from evaporation
Allows use of lower slump and lower water-to-cement ratio concrete
Reduces wind crusting, stickiness, and sponginess for better surface texture
Aids finishing of concrete with little or no bleed water, like microsilica mixes
Meets ACI 302 and EPA VOC standards
Application Instructions
Agitate well before use
Apply to fresh concrete right after screeding, and as needed between finishing operations
Dilute with clean, potable water at a 5:1 ratio (up to 9:1 for lighter conditions); mix thoroughly before applying
Apply at 300-500 sq ft per gallon under typical conditions, or 250-300 sq ft per gallon in more severe drying conditions
Re-apply as needed under severe drying conditions or with dry-shake hardener applications
Technical Data Summary
Shelf Life: 1 year from manufacture date when stored properly
Packaging
Available in 5-gallon pails (also offered in 55-gallon drums and 1-gallon jugs).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SFILMC-5Tags:Cementitious Products and LiquidsSize:5 Gallon, 55 Gallon
SpecFilm Concentrate dilutes with potable water up to a 9:1 ratio, forming a thin, continuous film that's especially effective when concreting in direct sun, wind, high heat, or low humidity.
Key Features & Benefits
Significantly reduces plastic shrinkage and cracking from evaporation
Allows use of lower slump and lower water-to-cement ratio concrete
Reduces wind crusting, stickiness, and sponginess for better surface texture
Aids finishing of concrete with little or no bleed water, like microsilica mixes
Meets ACI 302 and EPA VOC standards
Application Instructions
Agitate well before use
Apply to fresh concrete right after screeding, and as needed between finishing operations
Dilute with clean, potable water at a 5:1 ratio (up to 9:1 for lighter conditions); mix thoroughly before applying
Apply at 300-500 sq ft per gallon under typical conditions, or 250-300 sq ft per gallon in more severe drying conditions
Re-apply as needed under severe drying conditions or with dry-shake hardener applications
Technical Data Summary
Shelf Life: 1 year from manufacture date when stored properly
Packaging
Available in 5-gallon pails (also offered in 55-gallon drums and 1-gallon jugs).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemSKU:SFILMC-5Tags:Cementitious Products and LiquidsSize:5 Gallon, 55 Gallon

Product reviews
Customer rating

Check stock after changing quantity



















